| Regulations issued by State Environmental Protection Administration (SEPA) |
| Administrative Measures on Prevention and Control of E-waste Pollution (SEPA Order No. 40) |
Electronic wastes refer to abandoned electronic products, electric equipment and their components as well as articles and substances that are subject to e-waste management as required by SEPA and other departments concerned. They also include waste products or equipment arising from industrial production, scrap semi finished articles and rejects, other waste products generated from maintenance, renovating and reproduction of products or equipment, any abandoned products or equipment from daily life or related service activities and those prohibited from production and import by law and regulations. |
| This regulation is applicable to People's Republic of China for the prevention and control of pollution arising from disassembling, utilizing and disposing of electronic wastes. |
| It is also applicable to pollution control from e-wastes generation and storage. For related laws and regulations that provide otherwise, those laws and regulations shall prevail. |
| Prevention and control of environmental pollution caused by activities relating to electronic hazardous wastes are subject to provisions on hazardous wastes management of the Law of People's Republic of China on Prevention and Control of Pollution by Solid Wastes. |
| National Standard for Environmental Protection |
| Technical requirement for environmental protection product£Supersonic flowmeters of wastewater (HJ/T15-2007) |
This standard specifies technical requirement for supersonic flowmeter for open channel wastewater, testing items, methods, rules and requirements for packaging, transport and storage. |
| This standard applies to ultrasonic open channel flowmeters for the measurement of outflow of open channels and flow of all kinds of waste water that is not carried in pipes. |
| Technical requirement for environmental protection product£Ultrasonic pipe flowmeters (HJ/T366-2007) |
This standard specifies classification and naming of ultrasonic pipe flowmeters, their technical requirements, testing methods, rules and requirements on labeling, packaging, transport and storage. |
| This standard is applicable to ultrasonic pipe flowmeters for measuring the flow of pressurized pipe liquid. |
| Technical requirement for environmental protection product£Electromagnetic pipe flowmeters (HJ/T367-2007) |
This standard specifies technical requirements on electromagnetic pipe flowmeters, testing methods and rules and requirements on labeling, packaging, transport and storage. |
| This standard applies to electromagnetic flow transmitters or flowmeters combining sensors and transmitters that are used to measure non-compressible water and wastewater in closed pipes. |
| Technical requirement and test procedures for special orifice flowmeter for total suspended particulate sampler calibration (HJ/T368-2007) |
This standard specifies technical requirements and determination methods for special orifice flowmeter for total suspended particulate sampler calibration. |
| This standard is applicable to orifice flowmeters that cater for the need of big volume and middle volume. |
| Technical requirement for environmental protection product£Chemical feed equipment for water treatment (HJ/T369-2007) |
This standard specifies classification and naming of chemical feed equipment for water treatment, technical requirements, testing methods and requirements on labeling, packaging, transport and storage. |
| This standard is applicable to equipment adding powder and liquid chemical to water supply, circulating water and sewage treatment. |
| Technical requirement for environmental labeling products£Offset printing ink (HJ/T 370-2007) |
This standard specifies the terminology and definition of environmental labeling product of offset printing ink, basic requirement, technical content and testing methods. |
| This standard applies to offset printing ink except radiation curing printing ink. |
| Technical requirement for environmental labeling products£Gravure and flexible printing ink (HJ/T 371 -2007) |
The standard specifies the terminology and definition of environmental labeling products of gravure and flexible printing ink, the basic requirements, technical content and testing methods. |
| This standard applies to solvent-based gravure printing ink, solvent-based flexible printing ink, water-based gravure printing ink, water-based flexible printing ink and solvent for the use of gravure and flexible printing ink. |
| Technical Specifications for Urban Fugitive Dust Pollution Prevention and Control (HJ/T393-2007) |
This standard specifies the basic principles and measures to prevent and control pollution caused by various urban flying dust, sampling method and limit for road dust loading. |
| The standard is applicable to prevention and control of flying dust pollution from all kinds of construction sites in urban districts, laid and unlaid road surface, squares and parking lots, various open dumping sites, freight yards, mining and quarry, bare soil ground in cities and activities concerned with material mix, loading and unloading, delivery and transport. |
| Technical Guidelines for Environmental Protection in Ecological Construction Projects for Check & Accept Completed Project (HJ/T 394-2007) |
This standard provides the overall requirements for check and acceptance investigation and requirements for preparation of implementation scheme investigation report of completed construction projects that have an impact on ecological system. |
| This standard applies to construction projects that have an impact on eco system such as transportation (highway, railway, urban road and metro transport, port and shipping and pipeline transport, etc.), water conservancy and hydropower, exploration of oil and gas, mining, power generation (wind energy), agriculture, forestry, husbandry, fishing, tourism, development of oceanic resources and coast belt, high voltage power supply and transmission and check and acceptance investigation of completed construction projects for regional and river basin development. Other projects with environmental concerns can be evaluated pursuant to this standard. |
| Environmental information terminology (HJ/T 416-2007) |
The standard provides terminologies and definitions that are often used in environmental information system building and day-to-day work. |
| The standard applies to environmental information system building and development and utilization of environmental information resources by environmental protection bureaus at all levels. |
| Environmental information classification and code (HJ/T 417-2007) |
This standard provides classification and code of information on environmental management, environmental science, environmental technology, environmental industry and other related information. It only provides basic framework and code on environmental information classification. |
| The standard applies to environmental information collection, exchange, processing, use and building of environmental information system for environmental protection bureaus at all levels. |
| Specification for environmental information system integration (HJ/T 418-2007) |
The standard specifies technical requirements on environmental information system integration including application integration, data integration and network integration. |
| This standard applies to integration of environmental information system and its users include technicians for the plan and design of environmental information system. |
| Specification for environmental database design, operation and management (HJ/T 419-2007) |
This standard specifies basic principles for the design, operation and management of environmental database. |
| This standard is applicable to guide competent environmental departments at national, provincial and municipal level and related institutes for the design, operation and management of relational environmental database system. It can serve as reference for environmental protection departments at all levels to check and accept database system designed and developed by related institutes. |
| The following standard shall be void upon when the above standards are put into effect. |
| Supersonic flowmeters of waste water (HJ/T15-1996) |
| Ultrasonic pipe flowmeters (HCRJ057-1999) |
| Electromagnetic pipe flowmeters (HBC34-2004) |
| Technical requirement for special orifice flowmeter for total suspended particulate sampler calibration (HBC4-2001) |
| Chemical feed equipment for water treatment (HCRJ068-1999) |
